CPE890 Outdoor CPE Ptp Ptmp 10km with Qualcomm Chipsets Wi-Fi5 5g 900Mbps
CPE890DH is an high power industrial 5G outdoor CPE with 10KM PTP/PTMP range. Comply with the next generation 802.11ac W
|Certification||ISO9001, RoHS, CE|
CPE890DH is an high power industrial 5G outdoor CPE with 10KM PTP/PTMP range. Comply with the next generation 802.11ac Wi-Fi standard, Qualcomm Chipset, combined 900Mbps high speed in 5.8G, equipped Gigabit WAN port, 3 times Ethernet data rate faster than 300Mbps model; It with LED display to show and configure CPE's operation mode, Channel, IP address and Signal Strength, simple to do the Point to Point connection by reset button, no need to access into GUI.
900Mbps Data Rate & Gigabit WAN/LAN Ports
CPE890DH features 802.11ac Wi-Fi and 2*2 MIMO technology, 900Mbps wireless speed. Equipped with Gigabit Ethernet port ensures high speed internet access and more end users access.
5GHz frequency, more channels, lower latency, higher stability
CPE890DH with full frequency of 5020~6100MHz, more than 200 channels available, it avoid the frequency interference problem, full meet with data transmission in fast speed, low delay, high stability requirement in wireless security or data transmission.
10KM PTP/PTMP Distance
Designed in two line Power Amplifier on PCB board, the power can be 300mW high power, 15dBi MIMO high gain panel antenna, greatly increase the Wi-Fi range to 5KM distance, then supply the stable Wi-Fi signal for users.
Power over Ethernet
CPE890DH has integrated IEEE802.3at 48V PoE, for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
- Comply with IEEE 802.11ac/a/n, 5GHz,900Mbps Data Rate
- 1*10/100/1000Mbps WAN Port, 1*10/100/1000Mbps LAN Port
- 300mW high power, build in 15dBi MIMO panel antenna, stronger signal strength, more wireless coverage
- Support 48V IEEE 802.3af PoE
- Support SSID broadcasting, Muiti SSID up to 4, then support tag VLAN based on SSID.
- Support Wireless AP, Repeater operation mode
- With function of build in firewall, IP filter, URL filter and MAC filter
- Comply with IEEE 802.3az standard, RF power adjustment and frequency analyzer for better application in different environment
- Support DDNS, VPN pass through, Port forwarding and DMZ host
- Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security
|Standard||802.11ac/a, MIMO technology|
|Memory||128MB DDR2 RAM|
|Interface||1 * 10/100/1000Mbps RJ45 WAN Port|
|1 * 10/100/1000Mbps RJ45 LAN Port|
|1 * LED display, 1 * F(Function) switch button, 1 * S(Select) button, press it to setup WDS PTP/PTMP connection|
|1 * Reset button, press 15 seconds to revert to default setting/press 1 seconds to finish the WDS PTP/PTMP connection|
|Antenna||Build in 15dBi MIMO Panel Antenna|
|Power consumption||48V PoE, <15W|
|Surge||±2KV in different mode|
|Water Proof Level||IP65|
|Size||260mm * 85 mm * 45mm|
|5GHz: Standard: 5150~5825MHz, Debug: 5020~6100MHz|
|Modulation||OFDM = BPSK,QPSK, 16-QAM, 64-QAM|
|DSSS = DBPSK, DQPSK, CCK|
|RF Power||< 26dBm|
|EVM||802.11a: ≤-25 dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB|
|Operation mode||Wireless AP, Client|
|Wireless Security||64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption|
|SSID||Multiple SSID up to 4|
|Firewall||DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain FilterIP and MAC Address Binding|
|Package Contents||900Mbps Dual Band wireless access point |
Quick Installation Guide
|System Requirements||Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux|
|Environment||Operating Temperature: -30~55 ºC|
Storage Temperature: -40~70 ºC
Humidity: 5%~95% non-condensing
|Management||Firmware GUI ,Remote Management, WLAN Controller, Cloud Management System|